|
BladeTape is priced according
to the quantity ordered. Please see the bulk price chart below. Price will
be adjusted automatically. |
|
|
 |
BladeTapeŽ is a revolutionary, patented lightweight alternative to traditional cloth hockey stick tape. BladeTapeŽ utilizes a rubber surface
material with simple peel 'n' stick technology that easily applies to both
the front and back faces of your hockey stick blade.
You'll get durability (up to 15 games or more), improved stick handling, and
a better 'feel' for the puck.
Available in your choice of 10
colors! |
|
BladeTape is
being
used in the NHL! |
 |
Hear Willie Mitchell comments about BladeTape
|
|
|
Easy Peel & Stick BladeTape
Installation . . . |
|
 |
1. PREPARING THE BLADE
Make sure blade surface is clean and dry. If installing on an old blade
ensure blade is free of burrs, cracks etc. by removing or sanding smooth.
Remove all old tape debris and residue. Ensure both blade and BladeTape are
at, or above room temperature. Best application and performance is achieved
if installed the night before the game. Lay BladeTape on clean table surface
to determine fit. If necessary, cut/trim BladeTape with scissors prior to
removal of the adhesive backing paper. Re-test and adjust as necessary. |
|
 |
2. PREPARING THE BLADETAPE
Peel away BladeTape from the adhesive backing paper completely by using the
pull tab. |
|
 |
3. INSTALLING THE BLADETAPE
Apply BladeTape onto the blade working from center lower edge and working
outward in both directions. Minimize air pockets. Re-lift and apply as
required to eliminate any air pockets. There is no need to stretch the
BladeTape as you place it on your blade. Maintain an 1/8" (3mm) clearance
from the bottom of the blade for best performance life. When satisfied
BladeTape is positioned properly, press firmly in place with warm hand
pressure. |
Frequently Asked Questions
|
|
